About Basement Flooding
Typically, basement flooding occurs as a result of general flooding, such as when a river in the vicinity overflows its bank or there is standing water that is above the foundation grade of your home.
Therefore, the only way to prevent a flooded basement arising from natural causes is by raising the grade level of your home – which is expensive and illogical. However, if your home is higher than the ground it stands on, then you can easily get a professional to dig out swales to drain water away from your home.
On the other hand, you might be living in an area that is not susceptible to natural floods. As such, you probably have great joy and pride in your finished basement. You might also have spent a lot of money and time converting the dungeon into a comfortable and welcoming living space.
To this end, the last thing you will want is a tidal pool of sewage or ground water infiltrating your new wet bar or home office. A cresting creek or a simple flash flood can easily transform your space into a massively horrifying moldy sponge.
However, you haven’t finished working on your basement until you learn these 2 ways to prevent a flooded basement. Through these preventative steps, you can protect your home whenever you are faced with floods and water problems. Consider the following:
1. Downspouts and Gutters
One of the 2 ways to prevent a flooded basement revolves around the exterior of your home – which is just as important when you want to protect your home. The downspouts and gutters outside your home, to this end, tend to direct melting snow and rainwater away from your basement.
Therefore, it is imperative that you ensure that your gutters are always clear and clear of debris and leaves at all times. This way, nothing will block the water from flowing away from your home.
Similarly, take steps to clean your downspouts at least once every year. This will keep your home looking great while warding off all potential sources of flooding and water damage.
2. Sump Pump Maintenance
The sump pump in your home is important in the event of a flooded basement or a water emergency. These pumps are typically located in crawlspaces and basements. As a crucial piece of equipment, they pump water away from the basement and into the storm drains located outside your home.
Therefore, you must test your pump severally to check that it is working as required. To do this, pour 5 gallons of water down the sump pit. This will activate the pump, move through the pump and up a vertical pipe away from the basement.
In case the sump pump isn’t activated, call in a trained plumber to assess the situation, examine your pump, and determine whether it needs to be repaired and/or replaced.
In case these 2 ways to prevent a flooded basement do not work, give us a call or send us an email. We will send our experienced plumbers over to check what is wrong and to provide you with appropriate solutions.